Manuel Jirado High Voltage Power Supply

Probe Kit

The Relatively Short-Lived Ford Probe

A near-decade of the Ford Probe, which was a car that proved quite interesting when it was first rolled out by the Blue Oval folks back in 1988 for the 1989 model year, seemed to have gone by in the blink of an eye back then. Put forth as the replacement for the Ford EXP two-seater, it was built off the well-liked Mazda G platform, and made in front-wheel-drive only. It was also supposed to replace the Mustang, though that never happened.

The Ford Probe was also intended as a kind of fighter against an anticipated rise in oil prices, with the aim of the car's designers to deliver a vehicle that boasted excellent performance in both 4 and 6 cylinder trim while also helping company average fuel economy goals. It largely delivered on both fronts, though sales upon its introduction in 1988 as a 1989 model never did live up to expectations.

The Probe's design was always sleek and modern over the two generations. Initially wedge-shaped and futuristic in design, the car attracted many but also spooked a few who weren't used to a vehicle that resembled the Probe in design. The car shared much of its mechanical underpinnings with its sister Mazda 626, both of which rolled off the same assembly lines at the company's Flat Rock, Michigan plant, which it and Mazda had jointly developed.

Sales of the car, however, even after its redesign in 1993 led to it winning Car of the Year awards from a couple of different automotive magazines, were perennially disappointing and the plug was finally pulled at the end of the 1997 model run.

Engine offering were also a point of pride for the Probe, with even the 2. 2 liter powerplant managing to deliver a decent 110 ponies at a push of the gas pedal. The turbocharged version of the same engine sent 148 horses of power scampering down the road, and the original V6 almost matched the high-performance mill's output. The two generations of Ford Probe, in fact, never had a bad engine between them.

Even though Ford back in those days had a seeming reluctance to move quickly in a quickly-evolving marketplace, the Probe demonstrated what the company could do when it felt compelled to throw a strong import fighting vehicle into the fray. The vehicle came stocked with advanced technological features for the day -- especially during the life of the first generation -- and was never dull or uninteresting.

The years since the model's discontinuation have proven the durability of the second generation's chassis and underpinnings, and there are still a number of outstanding examples of the hot-rod version of the Probe (the GT, which boasted a normally aspirated V6 that put out 164 robust horses), which came kitted out in front-wheel drive and a vigorous performance stance.

About the Author

Andy Zain is the admin of Ford Probe Forums , a place where fans and owners can get the right information for tuning, customization and general discussions on anything about Ford Probe. Get the information you need when you visit Ford Truck Forums

Pyrometer Probe $139.99 Pyrometer Probe; Competition Series Probe Kit;

Grisoft / Tone and Probe Kit / 701K $118.32 Grisoft - Tone and Probe Kit - 701K

Ideal / TONE & PROBE KIT / 33-864 $105.89 Ideal - TONE & PROBE KIT - 33-864

Auto Meter Pyrometer Probe $65.99 Pyrometer Probe; Street Series Probe Kit;

Intellitone Pro 200 Toner And Probe Kit $177.99 INTELLITONE PRO 200 TONER AND PROBE KIT

Chattanooga High Volt Probe Kit $136.5 High Volt Probe KitThe High Volt Probe Kit includes a light-weight High Volt Probe and two sponge covered applicator tips (15mm and 8mm).

Nutrient Probe Cleaning Kit: J $18.28 Probe cleaning is one of the most important parts of owning and operating any Bluelab Truncheon™, meter, monitor or controller. If the probe is contaminated (dirty), it affects the accuracy of the reading displayed. The probe surface is where the instrument takes the reading of the solution. The information is sent back from the probe to the electronic brain of the instrument. A calculation is then done in the instruments brain or micro computer and a reading is then displayed. If the information sent back from the probe is inaccurate due to probe surface contamination then the reading will be inaccurate. Cleaning the probes is a very easy task and prolongs the life of the probes. pH cleaning and calibration kit: • Full color laminated instructions • Calibration solutions • De-canter vessels • Probe cleaner • Toothbrush

Food Thermometer Kit Probe Type -40F to 1000F $206.95 The Comark KM28-P7 Food Thermometer Kit Probe Type is a highly versatile thermometer with a temperature range of -40F to 1000F. With the Comark Food Thermometer Kit Probe Type, you receive a KM28 thermometer with a protective rubber boot and two probes: a PK19M reduced tip insertion probe and a SK22M surface probe with 45 crank all in a convenient case. The Comark KM28-P7 Food Thermometer Kit Probe Type is designed to meet the U.S, Food code and is ideal for use during food transport.

Thexton TX490 Probe Kit Back $38.69 Sharp small diameter probes slide along wire into connector to back probe circuit. No need to disconnect connector and terminal. Kit contains 20 pintype back probes in five different colors.

Aube AC-144-03 Indoor/Outdoor Temperature Probe Kit $6.98 The Aube AC-144-03 Probe Kit allows for temperature averaging when used with the TH144 series thermostats. Type: Thermostats & HVAC

pH Probe Clean - Calibration Kit: J $25.5 Probe cleaning is one of the most important parts of owning and operating any Bluelab Truncheon™, meter, monitor or controller. If the probe is contaminated (dirty), it affects the accuracy of the reading displayed. The probe surface is where the instrument takes the reading of the solution. The information is sent back from the probe to the electronic brain of the instrument. A calculation is then done in the instruments brain or micro computer and a reading is then displayed. If the information sent back from the probe is inaccurate due to probe surface contamination then the reading will be inaccurate. Cleaning the probes is a very easy task and prolongs the life of the probes. pH cleaning and calibration kit: • Full color laminated instructions • Calibration solutions • De-canter vessels • Probe cleaner • Toothbrush

TRACETone Tone Generator & Amplifier Probe - Network cable testing kit $59.99 IDEAL TRACETone Tone Generator & Amplifier Probe - Network cable testing kit

Fluke Networks / PRO 3000 Tone Generator with Probe Kit / 26000-900 $88.96 Fluke Networks - PRO 3000 Tone Generator with Probe Kit - 26000-900

Harris Pro 3000 Tone Generator With Probe Kit 26000900 $96.89 Harris Pro 3000 Tone Generator With Probe Kit 26000900

Power Probe PP ACC01 Power Probe Accessory Kit $43.11 A great addition to your Power Probe Circuit Tester. Includes: 20 ft. extension for those longer vehicles such as motor homes trailers etc. Cigarette lighter adapter power adapter 9 extension probe Case to carry it all the accessories and your Power Probe.

Power Probe Master Test Kit. Each $332.82 Manufacturer: Power Probe. Each. Features and Benefits: Includes Power Probe III, ECT2000, LS01 The last Test Kit you will ever need New Improved adapters Compatible with both 319 and ect2000 Easy to read back lit voltmeter This test kit allows the techn

Auto Meter Intake Temperature Replacement Probe Kit $56.69 For use with Auto Meter intake temperature gauges. Replacement kit includes 1-8" stainless racing probe wire and 1-8" NPT compression fitting.

Thexton Back Probe Kit. 1 Kit $26.79 Manufacturer: Thexton. 1 Kit. Features Benefits: Sharp, small diameter probes slide along wire into connector to back probe circuit No need to disconnect connector and terminal Kit contains 20 pin-type back probes in five different colors Sharp, small

IDEAL Tone Generator and Amplifier Probe Kit $90.99 1 x F Connector 1 x RJ-45 33-864 9 volt battery included for both Tone Generator and Amplifier Probe Amplifier Probe: Battery low indicator Tone Generator: Three different tones Low battery LED indicates when to change battery Amplifier Probe: To identify and trace wires or cables within a group without damaging the insulation Tone Generator: To identify a wire within a bundle, at a cross connect or at a remote end F-Connector port for toning & tracing coaxial CATV cabling systems Tone Generator and Amplifier Probe Kit include Tone generator and Amlifier probe.The Amplifier Probe is designed to identify and trace wires or cables within a group without damaging the insulation and tone generator to apply a tone signal to a wire pair or single conductor, and trace with an amplifier probe. Coaxial IDEAL IDEAL Industries, Inc Network Testing Device Tone Generator and Amplifier Probe Kit Tone Generator and Amplifier Probe Kit Includes: Amplifier Probe Tone Generator Lead Set Cable Assembly Soft Black Pouch Twisted Pair www.idealindustries.com

IntelliTone 100 Toner and Probe Kit $152.99 Includes: IntelliTone 100 Toner and 100 Probe coax F connector adapter RJ11 and RJ 45 patch cables test leads with alligator clips lanyards owners CD and quick start guid

Thexton THX490 Probe Kit Sharp Back $29.26 Features and Benefits: Sharp small diameter probes slide along wire into connector to back probe circuit No need to disconnect connector and terminal Kit contains 20 pintype back probes in five different colorsSharp small diameter probes slide along wire into connector to back probe circuit. Don t damage wire insulation or break apart connectors to get an electrical reading use this easy back probe kit.

Pomona Electronics POM6343 Test Probe Kit $57.79 6343Basic Test Probe KitFeatures and Benefits:Here s a great kit for basic testing. You get a pair of quality modular test probes with 48 inches silicone insulated test leads with right angle DMM plugs 2 each insulated alligator tips and rigid back probe pins for use with probes.

Power Probe PP PP3LS01 Power Probe 3 Lead Set Kit $209 The combination of the PPLS01 and the Power Probe is the Pro's choice for diagnosing electrical circuitsThe sheer simplicity of use combined with the numerous variations of connectors and adapters makes this kit a real winnerIncludes: PP319FTC cigarette lighter adapter 3 probe tip battery hookup clips 20 extension cable alligator clip adapter 1 3 and 6 leads male and female adapters large and small piercing probes.

Power Probe Tester Accessory Kit. Each $26.96 Manufacturer: Power Probe. Each. Features Benefits: 20 foot extension for longer vehicles (motor homes, trailers, etc) Cigarette lighter adapter 9" extension probe Blow molded case to carry it all Customers also search for: Discount Power Probe Tester A

Power Probe PPRPP3LS01 Power Probe III Lead Set Combo $286.99 The Power Probe III has all the benefits of Power Probe I and II but now with a Voltmeter. The Power Probe II has a built in Banana jack which makes it a snap to use with the PPLS01 Lead Kit. By popular demand Power Probe has made this combo kit that includes the complete PP319FTC and the PPLS01 sets. Includes:. Power Probe III. Cigarette Lighter Adapter. Dimension: 3 Probe Tip. Battery Hook up Clips. 20 Ft Extension Lead. Alligator Clip Adapter. 6 Ft 3 Ft and 1 Ft Cables. Male and Female Adapters. 12 W x 14 L x 3.48 H.

Bard Site Rite Ultrasound Probe Sheath Kit, 10/Cs $212.5 Site~Rite Ultrasound System Probe Covers, 10/Cs.Each Kit Includes: 20 Gram Pack of Sterile Gel. 2 Elastic Securement Bands. Pre-folded probe cover.

Digital Aquatics ORP Probe $69.99 Digital Aquatics ORP Probe kit features male BNC connector and a 6 foot cable. Includes probe and one 400mV calibration packet. ORP stands for Oxidation Reduction Potential, which is a measure of water quality and stability. Natural seawater has an ORP of 250 - 350 mV. Values outside this range can be dangerous or even lethal.

Thexton Angled Electrical Back Probe Kit. 1 Kit $29.36 Manufacturer: Thexton. 1 Kit. Features and Benefits: Provides the technicians with an assortment of back probe pins which gives the technician access to the back probe circuit without any obstructions Also have longer pin to reach circuits that were pre

Power Probe 219FTC Power Probe Ii Circut Test Kit $92.87 Activate electrical components such as cooling fan motors window regulator motors lights relays etc. Short circuit protected Continuity testing for quick andeasy tests of short circuits for bad grounds. Audio tone is louder and easier to hear and indicatespolarity by using constant tones for both positive andnegative. Positive is indicated by a higher pitched tone andNegative is indicated by a lower pitched tone. The Audio tone can now also be turned off. The benefit ofsilencing the tone allows you to listen to a component whileactivating it with the Power Probe 2. Power Probe 2 now has 2 bright white LEDS instead of justone and Red /Green LED polarity indicator. Now Ergo designed and fits in the hand better. 20 foot long lead Quick. Selftest. Durable housing. Includes handy storage case extra set of 20 leads 9 extended probe and 12 volt power adapter.