Meter Multimeter Lead
Meter Multimeter Lead
![]() |
![]() Enhanced Test Lead for Agilent Fluke Clamp Multi Meter US $4.99
|
![]() Fluke compatible Lead Leads Probes Multimeter Meter US $10.90
|
How to Test Pool Pump Capacitor With a Multimeter ?
A pool pump is driven by a motor that starts under power from a capacitor. A failed capacitor will cause the motor to hum or buzz when the start cycle is activated. The buzzing noise will not be accompanied by rotation sounds from the impeller of the pump. In that case the pump is not working and the pool water is stagnant. Two types of pool pumps are available, and both are started by capacitors. Test the capacitor to see if it's all that's needed to restore service to a pool pump.
Instructions.Things You'll Need:
Insulated metal screwdriver
Slotted screwdriver, or 1/4-inch socket wrench
Needle nose pliers
Analog multimeter or digital multimeter with capacitance setting
1.1
Shut off the power to the pump with the breaker switch in the nearby breaker box.
2.2
Open the pump motor cover. The round cover is at the end of the pump cylinder. Use a slotted screwdriver or 1/4-inch socket wrench to remove the two cover screws. The capacitor is the cylindrical object held in place by a curved metal guard plate.
3.3
Drain all stored power from the capacitor. Touch both terminals on the top side simultaneously with the metal post of an insulated screwdriver, which will cause a spark and popping sound if the capacitor has a lot of stored power.
4.4
Remove either of the wires from a terminal on the capacitor. Use needle nose pliers to grip the connector, and unplug it from the terminal.
5.5
Test the capacitor with an analog multimeter if it is rated at 150 microfarads or less. Higher rated capacitors can ruin analog meters. Set the meter for "Ohms" on a 1k scale. Touch the meter leads to separate terninals, and watch the needle on the display. Either lead can go on either terminal for the test. The capacitor is bad if the needle drops to zero and stays there. The capacitor is good if the needle jumps toward zero and slowly swings up the scale to show greater resistance.
6.6
Test any capacitor with a digital multimeter that has a capacitance setting. Set the meter for "Capacitance" and touch the leads to the terminals. Either lead will work on either terminal. Check the digital display to see if the number comes close to the rating shown on the capacitor. If the numbers are off by more than 10 points, the capacitor is bad.
Source from:
http://www.capacitors-china.com
About the Author
Manufacturer of Motor Capacitor in China
|
|
Multimeter $81.25 High Quality Content by WIKIPEDIA articles A multimeter or a multitester, also known as a volt/ohm meter or VOM, is an electronic measuring instrument that combines several measurement functions in one unit. A typical multimeter may include features such as the ability to measure voltage, current and resistance. There are two categories of multimeters, analog multimeters and digital multimeters (often abbreviated DMM or DVOM.) Author: Miller, Frederic P./ Vandome, Agnes F./ McBrewster, John Binding Type: Paperback Number of Pages: 116 Publication Date: 2010/07/17 Language: English Dimensions: 5.98 x 9.01 x 0.27 inches |
|
|
OTC OTC3505A 100 Series Autoranging Automotive Multimeter $326.34 The 3505A is the latest version of the Classic 100 Series Autoranging Automotive Multimeter with many new and useful troubleshooting features. It still features all of the same basic Multimeter functions plus some new and powerful Automotive specific test functions. Auto/Manual Ranging. Resistance Continuity Diode and Capacitance Tests. RPM Measurement. Temperature Measurement ( degree F/ degree C). Millisecond Pulse width and Peak Volts measurements for Fuel Injectors. Duty Cycle and Frequency to 10M Hz. Dwell Measurement. O2 Cross counts. Relative Measurement can be used for low resistance measurements to remove test lead resistance from measurement. Data Recording: Min/Max for fluctuating measurements. Data Hold freeze data at the push of a button. Fused direct current measurement up to 10 amps through meter. Auto Power Off (can be disabled)Includes: 100 Series Automotive Multimeter heavyduty test leads with removable alligator clip ends inductive RPM clamp temperature probe. |
|
|
Ginsberg Scientific 7130641 Digital MultiMeter $37.93 A versatile meter with a myriad of potential uses. Almost all electrical experiments require the accurate measurement of voltage current or resistance. This digital meter is housed in a strong resilient plastic case with a .5in tall display and is highly accurate. Comes with attachment cords and uses 9 volt battery. American Educational Products have a lead ship time of 21 days. |
|
|
Milwaukee 2216-20 Digital Multimeter $129 Digital Multimeter - 2216-20. (1) Electrical Test Lead Set. (2) AA Batteries. Manual |
|
|
FLUKE 8855AKIT Automotive Meter Combo Kit Multimeter $627.36 A complete automotive diagnostic package with everything you need in an automotive multimeter. The Fluke 88V is made in the U.S.A. and carries the industry leading lifetime warranty. The Fluke 88V operates very similar to the classic Fluke 88 but with more problem solving power safety convenience and impact protection. The NEW Fluke 88V automotive multimeter with the measurement functions troubleshooting features and accuracy to solve virtually any problem on conventional and hybrid vehicles. It is also environmentally protected from shop dust and the occasional water splash. |
|
|
Series V Deluxe Automotive Multimeter Kit $469.95 A complete automotive diagnostic package. Improved measurement functions, trouble-shooting features and accuracy to solve more problems on conventional and hybrid vehicles. ? Built-in thermometer lets you carry one less tool (temperature probe included). ? Resistance, continuity and diode test. ? RPM measurements with inductive pickup (included). ? Millisecond pulse width measurements for fuel injectors. ? Frequency to 200 kHz and % duty cycle. ? Measure up to 1000 V ac and dc. ? Measure up to 10 A, 20 A for up to 30 seconds. ? 4_digits for precise measurements. Features: ? Magnetic hanger to attach meter to the vehicle and free your hands for other tasks. ? Min/Max-Average recording with Min/Max Alert to capture variations automatically. ? Relative mode to remove test lead interference from low ohms measurements. ? Large display digits and two-level bright white backlight for increased visibility. ? Analog bargraph for fast changing or unstable signals. ? Access door for fast battery changes without opening up the case. ? Limited lifetime warrantee, UL and CSA approved. ? Made in USA. 88V/A Combo Kit includes: ? 88V Automotive Multimeter. ? 1.5m long heat resistant silicone test leads. ? Removable test probes to pierce corroded terminals. ? Alligator clips. ? Magnetic hanger to position and hold meter to steel surfaces. ? Temperature probe. ? Inductive RPM pick-up probe. ? Two back probe pins. ? Insulation piercing clip (red) ? Durable case. By Fluke. |
|
|
Fluke Electronics Inc FL116 HVAC True RMS Multimeter $274.12 Compact truerms meter for HVAC (heating ventilation air conditioning) troubleshooting. The Fluke 116 was specifically designed for the HVAC professional. It has everything needed in an HVAC meter including temperature and microamp measurements to quickly troubleshoot problems with HVAC equipment and flame sensors. Builtin thermometer for HVAC applications. Microamps to test flame sensors. Low input impedance: helps prevent false readings due to ghost voltage. Large white LED backlight to work in poorly lit areas. Resistance continuity frequency and capacitance. Min/Max/Average with elapsed time to record signal fluctuations. Compact ergonomic design for onehanded operation. Compatible with optional magnetic hanger. CAT III 600 V safety rated. HVAC Multimeter Model includes the following:. 4 mm silicone test lead set. 80BK Integrated Temperature probe. Holster. Installed 9 V battery. User manual. |
|
|
Clamp On Digital Multimeter LCD Meter AMP Test Tester $18.99 Description:Clamp On Digital Multimeter LCD Meter AMP Test Tester designed for use by electricians, technicians, serviceman and hobbists who required an instrument that is accurate,reliable, and always ready for use.Digital clamp meter with data hold functionLCD display with automatic polarity indicationClamp meter Includes double-insulated leadsClamp on AMP meter incldues carry caseResistance measurements: max. 20KohmVoltage measurements: AC(max.750V) and DC(max.1000V)AC current measurements: max:1000AUses one 9V battery.Size: ~23.5 x 9 x 3.2cm(L*W*D)Weight: 407g |
|
|
Sperry Instruments 623DM6450 Digital Multimeter Autorange 9 Function 35 Range $90.49 Auto shutoff . Long flexible test leads . Easy to read industry standard graphics . Impact grade ABS housing with overmolded grips . To ensure safe operation meter includes test lead input icons for accurate lead placement every time |
|
|
Professional High Quality Multimeter Test Lead Kits LA04015 $7.99 Description:Universal Multimeter speciaty accessory test lead kits LA04015,Multimeter Test Lead Kits 2 module test probes(2mm), 2 group long insulated test cable, excellent anti-interference function.Test Lead Kits adopted with standard diameter plug(4mm),suitable for universal measurement.Professional Test Lead specialization:1kv,CAT III.Professional Test Maximum current 10A.lifetime limited warranty.weight:98g.cable length:90mm |
|
|
Electricians Digital Multimeter Readout $15.99 Description:Digital Multimeter for finding out electrical current.This Volt-Ohm-Meter will allow you to test DC and AC Volt, DC Current, Resistance, batteries, and diodes with a easy to read and understand LCD Screen.Added to this, you will be able to test with various strength settings to best be able to get an accurate reading.Digital Readout is a great tool for electricians, contractors, and other such professions as well as being a handy tool to have around the house for home repair.Display: 1.8 Inch LCDMeasures: DC Voltage, DC Current, AC Voltage, ResistancePower Source: 12V DC BatteryDimension: ~14 x 7 x 3.5cm (LxWxD)Weight: 337gOther Features:Largest Number displayed 1999Diode / Battery TestBuzzer sounds when resistance less than 30 OhmAccessories:User Manual |
|
|
Gb Electrical Gb Electrical Digital Multimeter DM6250 $30.3 Digital multimeter Digital multimeter is compact and functional, designed to exceed the expectations of the professional electrical Automatically shuts Off to save battery life and has 7 functions including, AC Volts range positions, AC Volts accuracy, DC Volts range positions, DC Volts accuracy, resistance (Ohms), resistance accuracy and Off Other features include diode test, continuity, battery testing, and CAT rating Includes temperature problem and (2) ?AAA? batteries Available Only At Dixon, Woodburn Brand #: GB Electrical DM6250 UPC: 035632065264 Keywords: multi tester digital electrical meter multimeter 7 function func circuit |
|
|
Greenlee Textron Greenlee Textron Multimeter Kit W case TK30 $34.89 Multimeter kit w/case This basic electrical kit includes 1 each of the following items: Model No. DM-20 manual ranging multimeter, model No. GT-10 polarity cube, model No. GT-11 noncontact voltage detector, and a durable carrying case Brand #: Greenlee Textron TK30 UPC: 783310121275 Keywords: electrical tester multimeter kit w case gt 10 11 circuit continuity dm 20 analyzer meter |
|
|
Amprobe Digital Multimeter. Each $120.44 Manufacturer: Amprobe. Each. Features and Benefits Temperature measurement capability to 1000 degrees C/1832 degrees F. 750 V AC/1000 V DC - highest voltage rating in this class of meter Checks resistance, continuity, capacitance and frequency Magne-Grip |
|
|
Fluke Digital Multimeter. Each $283.84 Manufacturer: Fluke Networks. Each. Features Benefits Wide 1000 V measurement range 10 amps continuous Minimum / Maximum to record signal fluctuations Auto and manual ranging Large display Versatile meter for field service or bench repair, the new FLU7 |
|
|
Multimeter Combo Kit .. $323.14 Manufacturer: Fluke Networks. Each. Features Benefits True-RMS Cat III at 1000V meter Cat IV at 600V Checks AC/DC volt, amps, milliamps, temperature, capacitance, resistance, continuity and frequency Min/Max/Average to record signal fluctuations Backli |
|
|
Digital Multimeter DT3266L $16.49 Overview:This meter can measure AC/DC voltages, AC/DC currents , resistance, diode, frequency, temprature and fulfill audible continuity test. It is very convenient to measure AC current, just make electric wires cross though the jaw of clamp.With the function of phase indication and identifying live-wire, this clamp meter is an ideal instrument for electricians.100% brand new and high qualityPackage contents:1 x Digital Clamp Multi-meter2 x Test Leads1 x User Manual2 x AAA BatteriesSpecification:Weight Approx:120.7gSize Approx:17.5 x 5 x 2 cm |
|
|
Fluke FLU179/1ACII Multimeter Combo Kit $454.99 Features and Benefits TrueRMS Cat III at 1000V meter Cat IV at 600V Checks AC/DC volt amps milliamps temperature capacitance resistance continuity and frequency Min/Max/Average to record signal fluctuations Backlight for dimly lit areas Large easy to read display screenThe 179 truerms Multimeter has the features needed to find the most electrical and HVAC problems.It s simple to use with significant improvements over the original. This particular 179 has more measurement functions conformance to the latest safety standards and a much larger display that s easier to view. Also it can withstand transient impulses in excess of 8000 V to help protect you from arc blasts resulting from surges and spikes. This combo kit includes the following: silicone test leads industrial test probes heavyduty alligator clips integrated temperature probe and a noncontact voltage tester all included in a soft side case. |
|
|
Universal Enterprises UEIDM383B Digital Multimeter $94.14 Features and Benefits: Measures 750 Volts AC and 1000 Volts DC amps resistance and continuity Extra large 33/4 digit 4000 count display MAX capture mode Diode check function Rugged to withstand a 10 dropThe DM383B is a best seller among HVAC and appliance technicians. This basic digital multimeter offers all the standard features expected in today s industrialquality meter. The extralarge 4000count display makes the readings easier to see plus the range and function indicators provide you with more onscreen information making this a solid value. 10 Amps AC and DC resistance to 40 Mehohms. With data hold low battery indication. CE and UL listed 600V CAT III. Five year limited warranty. |
|
|
Fluke FLU875E2KIT TrueRMS Multimeter Combo Kit $741.32 One 87V True RMS Multimeter. One AC220 SureGrip Alligator Clip Set. One C35 Lightweight Soft Accessory Case. One TL224 SureGrip Silicone Test Lead Set. One 80BK Integrated DMM Probe (Type K). |
|
|
Meter $6 Meter |
|
|
Fluke Compact Multimeter $164.95 The Fluke 115 is the solution for a wide variety of electrical and electronic testing applications. This true-rms meter provides easy one-handed operation in a compact package.Features:? AutoVolt: automatic ac/dc voltage selection? Large white LED backlight to work in poorly lit areas? 10,000 uF capacitance range? Resistance, continuity, frequency and diode test? Measures 20 A (30 seconds momentary; 10 A continuous)? Compact ergonomic design for one-handed operation? Compatible with optional magnetic hanger (ToolPak?)? Min/Max/Average to record signal fluctuations? CAT III 600 V safety rated? 3 Year WarrantyIncluded:? TL75 Test leads? Holster? User?s manual? 9V battery (installed) |
|
|
Digital Multimeter Electronic Tester AC/DC CLAMP Meter $15.79 Overview:This meter can measure AC/DC voltages, AC currents and resistance.It also can be use for diode and continuity test.It is very convenient to measure AC current,just make electric wires cross though the jaw of clamp100% brand new and high qualitySpecification:Package contents:1 x Digital Clamp Multi-meter2 x Test Leads1 x User ManualAC Current: Range 10mA ~ 20A, 100mA ~ 200A, 1A ~ 400AOverload protection: 400A on all rangesAC Voltage: Range 1V ~ 450VOverload protection: 450V AC on all rangesDC Voltage: Range 1V ~ 600VOverload protection: 600V DC / (peak AC) on all rangesDiode Test, Continuty test, Resistance measurements,Transistor P-N junction testContinuity test with buzzer sound while lt; 75 OhmResistance Measurement: 200K Ohm RangeMax display: 1999, Auto polarity displayPower: 2 x AAA 1.5V battery (not included)Cable length: about 80 cmWeight Approx:172.9gSize Approx:13.7 x 5.3 x 2.4 cm |
|
|
Gardner Bender 8 Function Digital Multimeter DM6400 $58.31 Digital multimeter. Test lead input icons for correct lead placement. Industry leading LCD display size. Large digit display for easy viewing. AC or DC voltage and current capable. Data hold feature captures reading on the display. Impact resistant housing with protective rubber boot. Operates from one 9 V battery. Length: 10.25. Width: 1.75. Height: 6.75 |
|
|
Range Digital Multimeter (VC97) $29.3 High performance meter with high accuracy3 3/4 digit, 32 mm digit high by LCD display meterFunction includes: DCV, ACV, DCA, ACA , resistance, capacitance, frequency, temperature, duty cycle measurement, triode, diode and continuity testOther functions include unit signal displaying, relative value measuring, auto range/manual range switch, auto power off and warning functionSpecifications:Display: 3 3/4 digit LCD with maximum readings of 3999, automatic negative polarity indicationMeasuring method: dual slop integrating A.D converter systemSampling rate: Approximately 3 times/secondOver range indication: OL displayOperating environment: Temperature (0 to 40 degrees Celsius, Humidity less than 80 percent RHStorage environment: Temperature (negative 10 to positive 50 degrees Celsius), Humidity less than 80 percent RHPower: 2 *1.5V AAA 7number batteryWeight: 622gDimension: 190*90*50 mmAccessories:ManualTPo1 temperature probeTest leads |
|
|
Digital Multimeter A830L Mini $11.43 - Diode and transistor (hFE) test- Automatic polarity indication- Backlight?? ?Basic features- Automatic polarity indication- Diode and transistor (hFE) test - Data hold for easy reading- Ranging mode: manual- Power supply: 9V battery (INCLUDED)- Basic accuracy: 0.8% ( 1.0% for 2000k range)- Overload protection: 220Vrms max. for 15 seconds- Over range: yes- Transistor test: yes- Diode test: yes- Low-battery indicationA830L- DC voltage: 200m/2/20/200/500V- AC voltage: 200/500V- Current: 200u/2/20/200m/10A - Resistance: 200/2k/20k/200k/2M- Overload protection: 200mA 250V fuse (10A-range is not fuse-protected)- Back lightPackage includes:1 x Multimeter2 x Test LeadUsage Instructions?????? ?Insert the BLACK lead to the COM slot and insert the RED lead to either the mA(AMP) and Voltage(VOhm) slot to measure amp and voltage figure. Dial the dialer to obtain different measurement unit. |
|
|
Blue Sea 8110 Mini Clamp Multimeter $179.96 Mini Clamp Multimeter Clamp allows measurement of AC and DC current in wires without disturbing the circuits or contacting live terminals Auto range simplifies operation: 0. 01-400 Amps, 0. 001-600 Volts Auto power-off selection - power turns off automatically after 10 minutes of non-use True RMS - required for accurate measurement of inverter output Large digital display makes reading measurements easy Data hold - press HOLD button during measurement to lock reading value Test leads included with meter. |
|
|
Lisle Test Lead Kit for Relay Test Jumpers $19.95 Kit Contains: Two terminal to banana tip wires Two pin tip to banana plug adapters One terminal to banana tip wire with jumper wire NOTE: Jumper wire may be used between common and open to close the relay circuit for testing and has a test port to easily check voltage. Also provides access for a clamp-on amp meter. Use with 56810 or 60610 to easily and securely connect relay test jumper to a multimeter. |
|
|
Fluke FLU233A Remote Display Digital Multimeter Kit $561.53 The New Fluke 233 Truerms Remote Display Digital Multimeter allows you to be in two places at once. Removable display gives the user flexibility for ease of readings. Readings can be made up to 30 feet away from the base unit allowing you to be in two places at once. Meter is auto ranging with min and max and average readings and hold. Display has large easy to read numbers and a bright backlight. Removable head for readings up to 30 feet away from base. Full feature meter resistance continuity diode capacitance temperature. Measures up to 1000 V ac and dc. True RMS ac voltage and current for accurate measurements on nonlinear signals. Hybrid approved. 10.7 W x 12.2 L x 3.5 H. |
|
|
Fluke FLU835 Digital Multimeter $533.97 Features and Benefits: 6000 counts 33/4digits Measure up to 1000V AC and DC Auto and manual ranging for maximum flexibility Analog bar graph for fast changing or unstable signals Measure up to 10 A 20 A for up to 30 secondsFrequency to 200kHz and percent duty cycle. Resistance continuity and diode test. 10 000 F capacitance range for components and motor caps. Min/MaxAverage recording with Min/Max Alert to capture variations automatically. Peak capture to record transients as fast as 250 s. Relative mode to remove test lead interference from low ohms measurements. Auto and manual ranging for maximum flexibility. Touch Hold to capture stable readings avoiding noisy signals. Large display digits and twolevel bright white backlight for increased visibility. Analog bar graph for fast changing or unstable signals. Input Alert provides audible warning against wrong use of input jacks. Improved selectable sleep mode for long battery life. Access door for fast battery changes without breaking the calibration seal. Classic design with new removable holster with built in test lead and probe storage. |
|
|
Equus Products EPI3347 Digital Multimeter AMP Probe $115.81 Features and Benefits Ideal for testing alternator output starter and battery current draw and all other electrical wiring circuits Operating range: 0600 AMP AC/DC Designed to work with all digital multimeters Measures parasitic draw Ergonomically designed for easy useThis digital multimeter inductive AMP probe features red/green indicator light that shows power and low battery an easy slide switch for measurement selection zero adjuster for calibration and includes a 2 test lead. |
|
|
88 Series V Automotive Multimeter .. $481.14 Manufacturer: Fluke Networks. Each. Features Benefits: The Fluke 88 Series V DMM has a large digital backlit display, for easy viewing in poorly lit environments The built in thermometer eliminates the need to carry a separate meter for temperature mea |
|
|
Amprobe APBPM51A Pocket Digital Multimeter $58.83 Features and Benefits. Measures AC and DC voltage resistance continuity with beeper capacitance and frequency. Fully autoranging with 7 measurement functions and 27 ranges. Large oversize digital display with measurement results and the unit icon. Data hold freezes measurement value on. Automatic power off. This shirtpocket sized meter is only 3/8 thick and weighs less than 3 oz. With full functionality offering AC and DC voltage to 600 V resistance to 40 Megohm capacitance to 3000 mu;F frequency to 1 MHz continuity with /beeper and diode test. Fully autoranging this meter offers seven different measurement functions with 27 full ranges of measurement. The digital display is oversized with large digits and annunciators. In spite of its size this meter is fully safety rated to CAT III 300 V CAT II 600 V and is UL listed. No other meter offers this small size with such performance and high safety ratings. Includes battery (installed) and user s manual. 1 year warranty. |
|
|
Black Mini Electron DC AC DB Ohm Multimeter Multitester $9.49 Description:Black Mini Electron DC AC DB Ohm Multimeter Multitester.The Mini Black Multitester is easy to carry and use, convenience fitted for some electron hobby.Made of plastic material, this DC AC DB Ohm Multimeter is durable, can use a long time.You can use the Electron Multimeter in more places, such as factory, school lab, home hobby, machine repairing, especially fitted for teaching E-learning classes, wireless electron test.Specifications:DC voltage: 0-10-50-250-500(1000)volts.AC voltage: 0-10-50-250-500(1000)volts.DC current: 0-0.5-50-250(500)mA.Ohm meter: R x 1K, R x 100K, R x 10KDecibels: -20dB- + 22dBColor: as photo shown.Size: ~(L)8.4 x (W)5.5 x (H)2.8cmWeight: 76.2gPackage contains:1 x mini multitester1 x test pole |
|
|
Hortistick 3 In 1 Multimeter: J $169.96 The HortiStick 3-in-1 brings the best of technology into one sleek meter. It combines the measurement of the three most crucial parameters needed for a successful harvest: pH, Conductivity, and Temperature. Package content: 1x Main Unit, 1x Hand Strap, 1x Replaceable Probe, 1x Operations Manual, 4x AA Size Batteries. Simple and easy to use. Simultaneous display of pH and nutrient concentration. Replaceable sensor for prolonged meter usage. Auto endpoint sensing & display lock. Automatic temp. compensation. Rugged and water resistant. Push button calibration with automatic shut-off. pH Range: 0-14.0, ppm Range: 0-1990, Temp range: 0-50°C pH Resolution: 0.1pH, ppm Resolution: 10ppm, Temp. Resolution: 0.1°C pH Accuracy: ±0.2, ppm Accuracy: ± 5% F.S., Temp. Accuracy 0.5°C 1 year warranty. |
|
|
Fluke 17B 2.6' LCD Digital Multimeter Meter (2*AA included) $90.3 - Multiple functions with Auto / Manual ranges.- Large LCD display, 4,000 Counts update 3/sec- Main Measurements: Frequency, Temperature, AC/DC A-V-Ohm, capacitance, Diode And Continuity, duty cycle- Frequency: 50Hz to 100Khz- Temperature: -55C to 400C- Capacitance: 0.01nF to 100uF- AC Volts: 0.1mV to 1,000V- DC Volts: 0.1mV to 1,000V- AC Current: 0.1uA to 10A- DC Current: 0.1UA to 10A- Resistance: 0.1 ohm to 40Mohm- Cycle: 0.1% to 99.9%- Data Hold Function- Both Auto range and Manual range Selectable- Overrange protection for all ranges- Polarity Indication: Indicates negative polarity- Overflow Indication- Sleep Mode / Auto Power off / Low Battery Indication- Frequency: 50 / 500 / 5K /50K / 100KHz, +/- 0.1% + 3- Temperature: -55C to 400C, 2% to 9 % +/- 2C- Capacitance: 50nF / 200nF / 2uF / 20uF / 200uF / 20mF, +/-2% +5- DC Volt: 400mV / 4V / 40V / 400V / 1000V, +/-1.0% + 10- AC Volt: 400mV / 4V / 40V / 400V / 1000V, +/- 3.0% + 3- DC Current: 400uA / 4,000uA / 40mA / 400mA / 4A / 10A, +/- 1.5% + 3- AC Current: 400uA / 4,000uA / 40mA / 400mA / 4A / 10A, +/- 1.5% + 3- Resistance: 400 / 4K / 40K / 400K / 4M / 40M Ohm, +/- 0.5% + 3- Duty Cycle: 0.1% to 99.9%, +/-1%- Continuity Test with Alert- Diode Test- Powered by 2 x AA 1.5V Battery (included)- Accessories: Test leads, 260C Thermo Probe, English Operation ManualSpecificationsDimensions: 6.81 in x 2.99 in x 1.3 inWeight: 27.83 oz |
|
|
Fluke 15B 2.6' LCD Digital Multimeter Meter (2*AA included) $79.9 - With Functions of Capacitance And AV-Ohm Measurements- Large LCD display, 4,000 Counts update 3/sec- Main Measurements: AC/DC A-V-Ohm, capacitance, Diode And Continuity- AC Volts: 0- 1mV to 1,000V- DC Volts: 0- 1mV to 1,000V- AC Current: 0- 1uA to 10A- DC Current: 0- 1UA to 10A- Resistance: 0- 1 ohm to 40Mohm- Capacitance: 0- 01nF to 100uF- Data Hold Function- Both Auto range and Manual range Selectable- Overrange protection for all ranges- Polarity Indication: Indicates negative polarity- Overflow Indication- Sleep Mode / Auto Power off / Low Battery Indication- Capacitance: 50nF / 200nF / 2uF / 20uF / 200uF / 20mF, +/-2% +5- DC Volt: 400mV / 4V / 40V / 400V / 1000V, +/-1- 0% + 10- AC Volt: 400mV / 4V / 40V / 400V / 1000V, +/- 3- 0% + 3- DC Current: 400uA / 4,000uA / 40mA / 400mA / 4A / 10A, +/- 1- 5% + 3- AC Current: 400uA / 4,000uA / 40mA / 400mA / 4A / 10A, +/- 1- 5% + 3- Resistance: 400 / 4K / 40K / 400K / 4M / 40M Ohm, +/- 0- 5% + 3- Continuity Test with Alert- Diode Test- Powered by 2 x AA 1.5V Battery (included)- Accessories: Test leads, English Operation ManualSpecificationsDimensions: 6.81 in x 2.99 in x 1.3 inWeight: 26.67 oz |


US $6.70




















































